298K时DyCl_3在DMF和水混合溶剂中无限稀释摩尔电导率的测定

在298K时测定了DyCl3在DMF和水混合溶剂中的电导率,根据λ=(k液-k剂)×10-3/c公式求得DyCl3的摩尔电导率λ值,按公式λ=λ0(1-βc(1/2))作图外推求得DyCl3在DMF和水混合溶剂中的无限稀释摩尔电导率λ0值。     

大功率 LED 电学参数模型的研究

为精确描述大功率 LED(Light Emitting Diode)的伏安特性, 将经典的肖克莱方程与 LED 物理模型结合进 行理论推导, 对所得方程进行泰勒展开, 并对该模型进行分段处理, 构建了大功率 LED 的电学参数模型。 通过 实测大功率 LED 的伏安特性数据验证了本模型比经典 PN 结模型更接近实际的伏安特性曲线, 与实测曲线一 致性更高, 误差在 1%以内。     

基于灵敏度分析的某纯电动车白车身轻量化研究

纯电动汽车迎来快速发展时期,但限于电池包的质量,电动汽车续航里程的提升存在一定限制.文中以某纯电动汽车白车身为研究对象,建立了基于刚度和模态的灵敏度仿真分析模型,以白车身质量最小为目标,通过计算获得了设计变量对于目标的灵敏度值.基于灵敏度分析结果,结合工程经验,制定出合理的车身轻量化方案,在性能不明显降低的基础上实现白车身减重6.2 kg,为开发过程中进行纯电动汽车车身轻量化提供参考.     

Preparation and characterization of doubly substituted microwave absorbing material by sol-gel technique for super high frequency applications

Rare earth Dy~(3+)and divalent Mn~(2+)elements substituting W-type hexagonal ferrites Ba_(1-x)Dy_xZn_2Fe_(16-y)Mn_yO_(27)(x=0,0.02,0.06,0.1 and y=0,0.1,0.3,0.5)were prepared by sol-gel method.The thermo-gravimetric analysis(TGA)and differential scanning calorimetry(DSC)was carried out to find the temperature at which single phase can be obtained.XRD patterns indicate the presence of the single phase for all the synthesized samples with the absence of any extra peak due to unreacted material and secondary phases.The occurrence of absorption bands at low wave numbers(563 and 446 cm~(-1)),can be assigned to the stretching vibration of metal and oxygen ions in FTIR spectra,which also confirms the single hexagonal phase for prepared material.The grains are of platelet like structure,which enhances the microwave absorption properties of hexagonal ferrites.The synthesized material exhibits the minimum reflection loss of-20.9 dB at 11.8 GHz frequency,which reflects the applications of this material in super high frequency devices.The microwave conductivity of the material increases with frequency.     

云南省香格里拉市伊隆迈铜多金属矿区物探异常特征

伊隆迈多金属矿位于西南"三江"义敦岛弧的南段东部斑岩成矿带中。以地质勘查资料为依据,通过开展物探工作获得了以下成果:60线长剖面的重力测量在2 780~4 500区间获得了明显的相对低重力异常,推断该区间深部存在隐伏中-酸性岩体;激电中梯扫面工作在测区东西两侧各获得一个北北西向展布的高极化率条带,推断这两个条带与玄武岩和黄铁矿化凝灰岩有关;利用放射性伽马总量测量对平面上石英二长斑岩脉的走向延伸情况进行了推测;利用高密度电法、激电测深及音频大地电磁测深对该区深部的地质特征进行了推测,根据高密度电法工作成果推断,石英二长斑岩在埋深30m范围内产状陡倾略偏南西,闪长玢岩前期侵入灰岩地层并形成较陡的接触面,石英二长斑岩在后期侵位于闪长玢岩与灰岩的接触面。     

Flow and heat transfer behaviour of nanofluids in microchannels

Flow and heat transfer of aqueous based silica and alumina nanofluids in microchannels were experimentally investigated. The measured friction factors were higher than conventional model predictions at low Reynolds numbers particularly with high nanoparticle concentrations. A decrease in the friction factor was observed with increasing Reynolds number, possibly due to the augmentation of nanoparticle aggregate shape arising from fluid shear and alteration of local nanoparticle concentration and nanofluid viscosity. Augmentation of the silica nanoparticle morphology by fluid shear may also have affected the friction factor due to possible formation of a core/shell structure of the particles. Measured thermal conductivities of the silica nanofluids were in approximate agreement with the Maxwell-Crosser model, whereas the alumina nanofluids only showed slight enhancements. Enhanced convective heat transfer was observed for both nanofluids, relative to their base fluids (water), at low particle concentrations. Heat transfer enhancement increased with increasing Reynolds number and microchannel hydraulic diameter. However, the majority of experiments showed a larger increase in pumping power requirements relative to heat transfer enhancements, which may hinder the industrial uptake of the nanofluids, particularly in confined environments, such as Micro Electro-Mechanical Systems (MEMS).     

基于电刺激的多模式康复系统设计和研究

针对脑卒中后肢体功能障碍、褥疮及疼痛,分析了临床上常用的治疗参数,设计了多模式电刺激治疗系统。该系统通过触摸屏与主芯片STM32L152RCT6进行通信,控制升压和极性转换电路产生幅值、频率及脉宽均可连续调节的双极性电刺激脉冲,验证了系统的稳定性和镇痛的效果。通过试验验证了系统能稳定工作,且电脉冲幅值与电阻值的变化无关,且能提高受试者的疼痛阈值。能产生临床使用的电刺激疗法的各类参数,有利于临床实验和相关科研的开展。电刺激技术能够缓解人体疼痛,提高疼痛阈值。     

基于正交设计的陶瓷再生混凝土配合比试验

为提高废旧陶瓷的再生利用率,将陶瓷颗粒与陶瓷粉作为再生混凝土骨料与掺合料进行再生利用.运用正交设计的试验方法,以陶瓷粉、陶瓷颗粒、再生细骨料、粉煤灰、硅灰为5因素,每个因素设置4个水平,共设计16组配合比方案,进行抗压、导热等试验,得到陶瓷再生混凝土的强度、导热系数等物理力学参数,并寻找出最优配合比.试验结果表明最佳配合比为:陶瓷粉的质量分数为10%,陶瓷颗粒的质量分数为20%,再生细骨料的质量分数为40%,粉煤灰的质量分数为15%,硅灰的质量分数为5%.     

便携式电务基础数据采集系统研究

对电务基础数据采集现状进行了分析,研究了在GPS定位技术支持下的便携式电务基础数据采集系统,包括系统软硬件设计、功能实现。     

《电工电子技术》课程教学模式改革初探简

《电工电子技术》课程是机电专业重要的专业技术基础课课程之一.要在有限时间内让学生学好本课程,为专业课打好基础,就要求教师有合理的课程教学设计.文中着眼于《电工电子技术》目前教学过程中普遍存在的问题,围绕理论教学和实践教学提出教学内容、教学方法和考核方式的改革,从而激发学生的学习兴趣,提高教学质量.